Vitaclean Handheld Shower Head Vitaclean Wall Mount Shower Head
3 Easy Steps to Install Vitaclean Handheld Shower Head
Unscrew your old handheld shower head.
If there isn't one there already, place the black rubber ring onto the top of the hose.
Attach the end of the hose onto your new Vitaclean shower head handle and tighten in a clockwise direction.
Pop in the Vitamin C & essential oil filter with the cap part facing down.
Screw on the head piece to the top of the handle and tighten.
Turn on the water.
Watch Installation Video
3 Easy Steps to Install Vitaclean Wall Mount Shower Head
Turn off the faucet
Remove the current shower head from the wall fixture by turning counter clockwise. If you cannot twist it off by hand, use a plier wrench.
Ensure there is no debris such as old pipe compound or old plumbing tape remaining on the base of the pipe.
Unscrew the spray plate from your Vitaclean Shower Head. The Microfiber Cloth and Ceramic Balls are already inside. Take the Vitamin C Shot from the packaging and place it inside the shower head. Screw the spray plate back on and assure it is tight. There should be no gaps between the spray plate and the body of your Vitaclean shower head.
Assemble the Vitaclean shower head to the wall fixture by turning clockwise and fasten until tight.
If you notice water leakage between the pipe of the shower head and wall fixture, secure with plumbing tape around the the pipe of the shower head and wall fixture